MT1, MT2, MT3, MT5 VERTICAL BLIND
HEADRAIL: Aluminum 1 ¾” wide by 1 ¼” high, 0.43 – 0.44 gauge wall thickness 6005-T5 alloy. Available in ANODIZED or powder coated WHITE and IVORY finish (drawing will be available upon request).
TILTROD: Aluminum 4 prong 18.283MM, 6005-T5 alloy anodized finish (drawing will be available upon request).
CARRIERS: 4 prong self aligning clutch mechanism with clear plastic stem, connected with 3 ⅛” plastic links (2 ⅞” and 1 ¾” plastic links available upon request).
Cord and Chain system – A 3 to 1 ratio reduction gear for a smooth and quiet operation with 180° rotation for each carrier. #10 nickel plated steel chain is used to open and close the blind and 2.00MM none stretch polyester cord in natural color attached to a cord weight is used to draw the blind.
Wand system – 4 prong control unit with 180° rotation for each carrier attached to 30” heavy duty plastic wand (48” heavy duty plastic wand will be available upon request). Each control unit is equipped with four self-lubricating wheels to ensure smoother travel inside the headrail channel.
Cord and Chain system – Available from left to right (one-way right), from right to
left (one-way left), from the center to each side (split draw), from each side to the
center (center stack), stack on one side controls on the opposite (opposite draw).
Wand System – Available from left to right (one-way right), from right to left
BRACKETS: 1.9MM L shape heavy duty zinc plated steel, available in 3 ¼” with snap in clip (3 ½” with valance clips and 4” brackets are available upon request).